In Tinkercad press Export and download the design as .stl, then open 0xr.space on a Meta Quest or an Android phone with AR, press Open and choose the file, and press View in your space. The design stands upright in the room, and Scale, then 1:1 Size, shows it at the size it was made. There is no account to make and nothing to install, which suits a class sharing a few headsets or phones.
Choose STL when the size matters. Tinkercad works in millimetres and an STL 10 or more units across is read as millimetres, so the size is right; but STL has no colour, so it opens light grey. OBJ or GLB keeps Tinkercad's colours, but an OBJ under 100 units across is read as metres, so a 50 mm keyring opens huge at 1:1; check SIZE in Info and scale it by hand. Nothing under 10 cm can be shown at 1:1.
It was opened as OBJ or GLB and read in metres, not millimetres. Export STL for the right size, or scale it by hand; the size readout follows.
STL stores shape only. Export OBJ or GLB from Tinkercad to keep the colours, and set the size by hand.
Yes. In Safari the design opens on screen to turn and scale, and View in your room places it on the table with AR Quick Look, with nothing uploaded.
Not below 10 cm. The longest side is held between 10 cm and 10 m, so a smaller part stops at 10 cm.
No. It is read on the device. Only Send to your headset or a share link uploads it, and that link expires after 30 days.
Still stuck, or need something the app does not do yet? Ask on Discord.