Open 0xr.space in Chrome on an Android phone with Google Play Services for AR, press Open and choose the .stl, or the .obj with its .mtl and pictures, then press View in your space and move the phone until the model stands in the room. Press Scale, then 1:1 Size, to see it at the size the file was read at. Binary and ASCII STL both open.
Neither format says what unit it is in, so the size is a guess. An STL 10 or more units across is read as millimetres, a smaller one as metres. An OBJ over 1000 units is read as millimetres, over 100 as centimetres, anything else as metres, so an OBJ part drawn in millimetres and under a metre comes out too big. An STL is light grey unless it carries per-facet colours; an OBJ without its .mtl is grey too.
The unit was guessed from the numbers in the file. A small OBJ drawn in millimetres is read as centimetres or metres. Pinch or use Scale to bring it to size, and check it under More, then Info.
STL stores triangles only, with no materials. Only the per-facet colours SolidWorks and a few other tools write are shown.
Only down to 10 cm on its longest side. A model is held between 10 cm and 10 m, so a 30 mm part stops at 10 cm.
Chrome did not offer an AR session. The phone may lack Google Play Services for AR, AR may be off for the site, or the page is open in another browser. The model still opens on the screen.
No. It is read on the phone. Nothing is sent to a server unless you create a share link yourself.
Still stuck, or need something the app does not do yet? Ask on Discord.